Can work continuously, the maximum discharge distance is about 1.5MM
Input voltage: 3-4.2V
Input current: up to about 2A
No-load current: 130MA (4.2V voltage)
Output voltage: 2000V (battery voltage is low, output voltage will also become lower)
Precautions:
When the 3V voltage is input, the output is about 1500V, the 3.7V input is about 1800V, and the 4.2V input is about 2000V.
This is a high-voltage, low-current, low-power boost module. If you want to increase the instantaneous discharge current, you can output a large-capacity, high-voltage capacitor in parallel (recommended to use 4 CB65 capacitors for air conditioners and 450V for series connection. Size you choose according to your needs)
Output circuit is voltage doubler rectifier
With high voltage discharge capacitor, 2000V 223
The board has a high-voltage capacitor, which may leave excess capacitance after use
High pressure danger, use need to pay attention to safety
2. Circuitos Integrados
3. Módulo Step up Booster com Capacitores de
4. Componentes Ativos
5. Circuitos Integrados
6. Módulo Step up Booster com Capacitores de
Avaliações de Usuários
0.0fora de 5
★★★★★
0
★★★★★
0
★★★★★
0
★★★★★
0
★★★★★
0
Escreva uma avaliação
Não existe nenhuma avaliação ainda.
Seja o primeiro a avaliar “Módulo Step up Booster com Capacitores de Alta Tensão Arco Pulso Motor dc 3.7v a 1800v” Cancelar resposta
Produtos relacionados
Adicionado a lista de desejosRemovido da lista de desejos0
Não existe nenhuma avaliação ainda.