Diymore pd qc Tipo-c 5v 9v 12v 15v 20v Bateria Rápido Módulo de Carregamento Pd2.0 3.0 Gatilho de Carregamento Rápido

Note:
:For Xiaomi’s Phone 20V only supports QC3.0 but not QC2.0, so PD does not support it at present.
:At present, all devices supporting QC2.0 can output 20V,;
:This module is equipped with E-mark, and the power without E-mark can only support 60W. E-mark support can make the output higher and more power;
:The module currently supports 5V/12V/15/20V output and requires other voltage outputs. Please pay attention to us. There will be more voltage version module updates in the future.

Parameters:
:Support PD3.0/PD2.0 voltage decoy output and free mode switching.
:Support 5V/9V/12V/15V/20V decoy output (specific range depends on your power supply).
:With key lock function to prevent misoperation (to avoid damage to load equipment due to mis-setting voltage).
:5V/9V/12V/20V fast setting. LED indicates output.
:The parameter braking is saved, and the last trick setting is executed by powering on again.
:Ultra-low power consumption (slightly heated at 20V), supporting 100W output.
:Maximum 20V5A output (actual value depends on your power supply).
:The type c male head is integrally formed and durable.

Instructions for use (power supply with PD protocol must be used):
:Press and hold the S key, then insert the module into the power supply, and then reset to 5V output (&>>& means power on)
:Press and hold the S+key, and then insert the module into the power supply. At this time, switch whether the key lock is turned on and the status is saved when the power is turned on. If the key lock is turned on, the voltage can be adjusted only after the power is turned on to prevent misoperation.
:After power-on, press and hold S+and then press S – to unlock when there is a key lock.
:After power on, press and hold S – and then press S+to lock the key.
:Quick start: plug the board into the PD power supply. At this time, the LED light indicates the existing set decoy voltage. If it is not on, it means the default 5V. If you want to adjust the output voltage. The board is locked by default. At this time, you need to unlock it first. The method is to press and hold S+, and then press S -. At this time, the unlocking is completed, and you can release the key. Then click S+to increase the voltage or click S – to decrease the voltage.

Interface description:
:Type-c male: used as input to connect PD power supply and can pass 20V 5A voltage and current.
:Type-c female: used as input to connect PD power supply, and also as output interface
:(At this time, keep the CC line hanging), the voltage and current of 20V5A can be passed.
:USB-A bus: As an output, it can pass 20V3A voltage and current.
:Positive and negative connection pad: as output, it can pass 20V5A voltage and current.

Matters needing attention:
:The power supply must support PD or QC protocols.
:The electric equipment cannot be mobile phones, tablets, etc. Whether the mobile phone is fast charged or not, it is useless to add this module. If it is fast charged, it is not necessary.
:Know whether the power of your load is less than the power of your power supply. Otherwise, the overload power protection has nothing to do with the decoy.
:Before use, confirm whether the time output voltage is suitable for the power supply voltage of the applied electrical equipment to avoid burning the equipment due to misoperation, otherwise the consequences will be borne by yourself.
:The board is altered without technical confirmation. Our store is not responsible for technical support and after-sales service.
:The board voltage indicator is only 9V/12V/15V/20V. If all four indicators are not on, it is 5V output.
:Keep your hands on the edge of the board as far as possible, and do not touch the chip directly to avoid human static damage to the chip.
:In the case of unknown setting of the decoy output voltage, do not connect the load first, and then connect it after confirmation to avoid the voltage exceeding the load withstand voltage.

Package Contents:
:1X module
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

1. Diymore pd qc Tipo-c 5v 9v 12v – tipo : Pulôver

2. Toys e Sports – Estilo da Manga : Regular

3. Beauty e Health – Colarinho : com Capuz

4. Phones e Accessories – com Capuz : Sim

5. Pd2.0 3.0 Gatilho de Carregamento Rápido – Número do Modelo : Zmx

6. Diymore pd qc Tipo-c 5v 9v 12v – Lugar de Origem : China Continente

7. Toys e Sports – Idade : 18-24

8. Beauty e Health – Espessura : Fino

9. Phones e Accessories – Estação : Primavera – Verão

10. Pd2.0 3.0 Gatilho de Carregamento Rápido – Composição do Material : Fibra Sintética

11. Diymore pd qc Tipo-c 5v 9v 12v – o Conteúdo da Tela : 81% Inclusive – 90% Inclusive

12. Toys e Sports – Padrões de Vestuário : Slim

13. Beauty e Health – Data de Lançamento : Verão de 2023

14. Phones e Accessories – Decoração : None

15. Pd2.0 3.0 Gatilho de Carregamento Rápido – tipo de Revestimento : Nenhum-liner

16. Diymore pd qc Tipo-c 5v 9v 12v – Drop Shippin : Yes