Way Filtros de Crossover Unidade de Áudio Falante Divisor de Freqüência Gama Completa de Graves Agudos Yly2088 400w Ajustável

Opção de Compra e tempo de entrega

Aviso Para mais informações sobre esse produto com preço promocionais e forma de entrega, click no botão abaixo e visite o portal da loja

Product I ntroduction

divider we all know, is installed in the sound box, to achieve sound, change the effect. The old frequency divider is rigid. If it is not suitable for users, it will not be able to change. Sometimes, it is difficult for beginners to solve the problem when the treble is too strong and the bass surface is poor, or the bass is too strong and the overall performance is not clear. If the frequency is not appropriate, and the cost is high. The frequency divider is a multi-purpose, comprehensive debugging, welding free, very convenient to use and the effect of listening to their own hobbies to achieve debugging automatic control. Use a wide range, can be used treble + bass bisection speaker, also can be used 2.1 treble small satellite box and car full frequency speakers, but also can be used single treble or single bass. Speaker 4-16 ohms of impedance can be used, power as long as the speaker below 400W are no problem.

Product Parameters

Frequency point: not fixed, determined by debugging

Power: 400W

Impedance: 4-16 ohms

Material: induct or made of oxygen-free copper winding, pure copper wire 08 wire diameter, our shop has been verified. Super capacitors, reasonable design beautiful appearance sound quality to achieve full control.

Operation Process

First connect the line of the divider, move the divider to the outside of the box shell, and then install the speaker, plug the hole will leak air, you can play the sound, listen to the effect while debugging.

Usually insert A not insert B, C and D listen to the high pitch to match how much and decide, insert A + D = bass rich, insert A + CD = high and low clear, insert AB + CD = high and low clear, insert AB + CD = middle frequency more. In addition, when the bass is long, if the bass horn can not stand the feeling, you can pull up the A to remove the ultra low tone.

Try different music, all the effects to their favorite, after debugging will be fixed frequency divider into the box.

A and B are control bass

A cap plug is the lower limit of the bass frequency control,

B cap plug is the upper limit of the bass frequency control.

The woofer used will sound low when the A plug is removed, but not below 80 to 120HZ (if plugged in).

When the b-bit plug cap is removed, the bass sound is limited to 1 to 4KHZ (there is no limit on the upper side of the plug, bass and treble).

When both AB are capped, the woofer is equal to the direct input bit without crossover control.

When both AB and AB are uncapped, the bass call limits the mid bass at a frequency of about 100KHZ-2.5KHZ.

C and D are control notes

C cap plug and D cap plug two coordination to control the lower limit of the frequency of the loudspeaker, composed of dark/medium/bright three kinds of high pitch effect.

When both CD caps are removed, the treble opens, but the treble speaker does not sound. At this time, the treble is subtracted and only the bass works. You can adjust the size of the case or the length of the air hole or the amount of sound-absorbing cotton and its placement position, so that the bass effect can reach a better state.

When both CDS are plugged in, the speaker’s pronunciation is limited to more than 2-5khz. In this case, the tweeter also includes the middle tone. which is considered to be medium-high (louder).

When only the C-bit cap is inserted, the high pitch pronunciation is limited to above 4-7khz and belongs to the high pitch (second ring).

When only the D-bit cap is inserted, the treble pronunciation is limited above 8-9khz, which is close to the super treble frequency band (third ring).

1. Yly-2088 400w Ajustável 2 Way Filtros de