Banco de Potência Móvel com Indicador Qc3.0 Qc2.0 Dual Usb 18w Tipo-c Usb Sw6106pd Carregamento Rápido 18650

Características do produto.
Support PD/QC/AFC/FCP/PE/SFCP and other protocols, does not support VOOC and SCP.
Board current and power is relatively large, replay point is the heat will be larger, is a normal phenomenon, similar products are the same. We have optimized as much as possible, can be used with confidence.
Fast charging current than ordinary charging current will be much larger, the battery requirements will be higher, 18650 battery discharge current to be large, it is recommended to use, if you use the collection of things battery, recommended to use more than 10000mAH brand battery.
Support battery temperature protection, can be connected to the temperature sensor.

Product parameters.
Output power up to 18w, efficiency can be as high as 95%.
Support 4.2/4.3/4.35/4.4V battery type.
Support battery temperature protection, can be connected to the temperature sensor.
Double overcharge and overdischarge protection.
Support line loss compensation, automatic load detection, automatic light load detection.
Output PD/QC/AFC/FCP/PE/SFCP/PE2.O/PE1.1
Input supports PD/QC/AFC/FCP and other mainstream fast charging.
type-c and microUSB can be selected.
USB input voltage and battery interface input voltage
Input voltage: MIN4.5v-MAX13.5V
Battery voltage: MIN2.8v-MAX4.5V
Battery input voltage: not higher than 4.5V,
USB input voltage: can not be higher than 13.5V
Output power greater than 18W or current greater than 3A will protect the power off
Current less than 60ma after 32S will disconnect the output
Product size: 71.5mm*18mm

Instructions for use.
Module input and output both support fast charging, input fast charging requires your charger is QC or PD charger. Generally can excite the 12V input.
If your device does not support those fast charging protocols of the module, the 5v normal output.
Input:The first few lights are always on, and the light in charging flashes. (such as charging the third light, the first two lights are always on the third light blinking)
Output: there are a few electricity is always on a few lights. (such as power three lights output, there are three lights always stay on) the first light is divided into white and green, fast charging input or output when the green light on, otherwise the green light does not light.
Must have welding tools, the board must be welded for normal use, not welding will lead to insufficient power supply current, this point is stressed a million times, if not welded, problems arise, do not ask us what the problem is.
Before use must look at the details, there are wiring instructions below, please follow the instructions, otherwise it is easy to burn the board.

Attention:
Module corresponds to connect the lithium battery positive and negative, use the phone charger to charge the board first to activate, the light is on to activate, and then only normal output
Power display procurement coulomb meter way to calculate the power according to the battery, so it is necessary to go through several cycles of charging and discharging to smart and accurate calculation of power.

Cell phone fast charging in two ways, one is to increase the charging voltage, such as QC3.0 is to enhance the voltage program. oppo’s part of the phone using VOOC flash charging and a plus flash charging is to enhance the current program, because the program is different, the two protocols do not can not use each other.
At present, the vast majority of cell phones are supported PD fast charging, PD fast charging output to use TYPE-C jack, Apple models use to configure the official website certified CTOL line. (USB port of the ordinary Apple first is unable to fast charging)
The maximum output voltage of the board is 12V, or mainly for cell phones fast charging, notebooks and other products requiring higher voltage can not be compatible.
This product supports FCP, SFCP, does not support SCP. how to identify is FCP and SCP, you can generally distinguish between FCP and SCP according to your phone’s original charger, the charger is 9V2A is FCP. is 5V5A is SCP super fast charging. fcp fast charging models are: P9 Nova Nova2 Nova2s Nova2plus McMansion 5 glory 8 SCP fast charging (not compatible) models are: mate9 mate9Pro P10 P10Plus v10 mate10 mate10PR0.

Operating instructions.
1,Prepare for use
Do not rush to use the board when you receive it, line check the appearance to see if there is no damage to the appearance, there is damage in time to contact us. Then, without connecting other lines, use the phone charging head to connect the board, to power the board, see the LED indicators will light up in turn. If they do not light up in turn, please contact us first, otherwise the welding will be considered to receive the board no problem. Check after all the problems can be ready to do assembly. Do static protection when assembling, there are many mos tubes on the board, afraid of static electricity. Soldering iron must be grounded electrostatic discharge, hands can not touch the electronic components.
2,Battery voltage setting
Board battery voltage default 4.2V, if your battery is a higher voltage battery, you can set the voltage by setting the &BEST&. Otherwise, this step can be skipped. The original marked with &BEST& is not soldered, then solder on the corresponding resistance value of 0603 resistor to set the voltage. Corresponding to the following: 62KO (4.35V) / 30KO (4.4V) / 10KO (4.3V).
3,Temperature sensor welding
If there is nothing wrong with the battery, the temperature sensor is generally not needed. The board comes with double overcharge and overdischarge protection. If you do need to add a temperature sensor, first remove the board R3 (next to C17) resistor, and then solder the 10K temperature sensor on the solder joints marked with NTC. If the R3 resistor is not removed or the temperature sensor value is not correct, there will be no charging.

Product list.
1X module

1. Phones e Accessories – Nome da Marca : Nail Sunshine

2. Qc2.0 Dual Usb 18w Tipo-c Usb Sw6106pd Carregamento Rápido 18650 – Número do Modelo : Nail File Block

3. Weddings e Events – Material : Plástico

4. Home e Garden – Tamanho : 17.8*2.8*0.4cm7*1.1*0.157inch

5. Computers e Electronics – Quantidade : 50 Pcs – Lot

6. Online Shopping – Tensão : Nenhum

7. Banco de Potência Móvel com Indicador Qc3.0 – Refer : P-50n-64