Bms 16s 60v 50a Placa de Proteção do Carregador de Bateria de Lítio com Bateria de Energia Equilíbrio Melhorar a Placa de Proteção para Bicicleta Elétrica

1. Beauty e Health – Sexo : Men

BMS Board Module Compact Battery Li-Ion Battery Pack for Protection Board BMS Fitting for 16S 60V 50A Batteries Durable

Selling points of products without balance:
1. Use high quality material, durable
2. Temperature control protection, safe and reliable
3. Lithium battery overcharge protection, over discharge protection; overcurrent protection, output short circuit protection
4. Can be used for 3.7V ternary battery, lithium manganese oxide battery and lithium cobalt oxide battery
5. Wide range of applications: electric vehicles, twisting cars, electric mopeds, scooters, inverters, etc.

parameter:
Model: 16S 60V/50A same port
Applicable voltage and power: 60V <2500W
Maximum working current: 50A MAX
Continuous working maximum current: 40A MAX
Over-discharge protection voltage: 2.6V
Overcharge protection voltage: 4.25V
Charging current: 40A MAX
Balanced charging function: optional
Temperature protection: with this function. Discharge high temperature 75°C; charge low temperature -7°C

Wiring steps:
(1) The acquisition cable is connected to each section of the battery to ensure the effective connection of the cable.
Make sure that at the cable plug end, the single potential sequence increases or decreases sequentially. The potential sequence is consistent with the potential sequence of the socket at the protection board end, and the potentials are in one-to-one correspondence.
(2) Solder the B-lead of the protection board to the total negative B- of the battery pack.
Ensure that the solder joints are firm and reliable and have good electrical conductivity. There are no possible hidden dangers such as extrusion and friction at the wiring position, and the wiring is smooth and short. Avoid solder, conductive objects or leads falling, sticking or touching the protective board.
(3) Connect the plug of the cable to the socket of the protection board.
First complete the welding of the B-lead of the protection board to the total negative B- of the battery pack, and then connect the plug of the cable to the socket of the protection board to ensure that the connection between the cable plug and the socket of the protection board is in place and there is no charged object Or the lead wire touches the protection board, and fix it well.
(4) B+ and c- are respectively connected to the positive and negative poles of the charging interface.
Make sure that other leads are isolated during the soldering process to avoid short circuits.
The battery pack voltage of the discharge interface and charging interface test is consistent with the battery pack voltage, the polarity is correct, and the wiring position is correct.
Precautions:
1. Please pay attention to the output power to configure the size of the nickel sheet;
2. Be careful not to repeatedly short-circuit P+ P- continuously, there will be circuit voltage spikes, which will easily cause damage to the MOS tube;
3. Be careful not to let the protection board touch the water, it is easy to damage!
4. Welding the board, please pay attention to anti-static operation!
Assembly Instructions:
1. First match the battery voltage, the difference is <0.1V;
2. The internal resistance of the battery is matched, and the difference in internal resistance is less than 5 ohms;
3. The battery is spot welded, and the test voltage is normal:
4. Weld the board with nickel sheet:
5. Connect the board to the lithium battery in the order of B0 B1 B2 B+.
Balance function:
The performance of the battery gradually deteriorates during use, including an increase in internal resistance, a decrease in capacity, and leakage between electrodes
Increased, inconsistent external line loss, etc., resulting in inconsistent voltages in each string in the battery pack, which is actually beneficial
The usage capacity is constantly decreasing. In order to alleviate this problem, a balancing function is introduced. during charging when
When the voltage of a certain string reaches a certain voltage point, the shunt circuit is started to reduce the charging current and slow down the charging speed
degrees, waiting for other strings. Thus playing a balanced effect.
Package list:
Lithium battery protection board*1
Temperature control line*1

2. Phones e Accessories – Comprimento da Manga cm : Completo

3. Bateria de Energia Equilíbrio Melhorar a Placa – Estilo : Vintage

4. Bms 16s 60v 50a Placa de Proteção – Colarinho : Stand

5. Toys e Sports – tipo de Modelo : Patchworkretalhos

6. Beauty e Health – com Capuz : Não

7. Phones e Accessories – tipo de Tecido : Waffle

8. Bateria de Energia Equilíbrio Melhorar a Placa – Lugar de Origem : China Continente

9. Bms 16s 60v 50a Placa de Proteção – Nome da Marca : Lipswag